欧州型,米国型HOゲージ,Nゲージ,一番ゲージ,Gゲージ,Oゲージ,Zゲージ,ストラクチャーをメインに取り扱っている外国型鉄道模型の通販サイト

車両別(グループ)

国別鉄道会社

Feed

Walthers HO GP40 w/DCC/Sound 10003263

  • ご予約受付中



    2020年9月発売予定



    In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The “40-series” included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has two fans at this location.

    Concurrent with GP40 production, EMD offered a lower horsepower, non-turbocharged locomotive based on the same 645-series prime mover. The four-axle GP38 was rated at 2,000 hp and had the advantage of costing less than the GP40. A total of 727 units were produced between 1966 and 1971 when the model was superseded. The wheelbase of the GP38 was identical to that of the GP40. Both units shared the same EMD road-switcher style body that was introduced with the GP35 in 1963. A desire for standardization caused the GP38 to share the same wheelbase, frame and many external components as the GP40. The GP38 was purchased by large and small roads alike. It was routinely found in local and road freight service throughout the US. Many GP38s and 40s are still in service today.

    Features:

    Golden-white LEDs
    Realistic die-cast underframe
    Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
    Directional lighting
    Factory-equipped with AccuMate® knuckle couplers
    Detailed cab interior with crew
    Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
    Movable drop steps
    Walkway safety tread
    Coupler cut bars
    Multiple unit hoses and trainline hoses
    Snowplow
    Additional feature parts included but not installed (GP-40):
    Electrical cabinet air filter box (ECAFB)
    Two engine compartment roof vents which were added by many railroads sometime after delivery
    Sound Features for Gold Series:

    DCC Operation Features:

    Supports all DCC-programming modes
    Flexible mapping of function keys F0 to F28.
    Follows all NMRA DCC standards and recommended practices.
    Sound Functionality Features:

    Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
    There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
    Manual and Automatic Notching modes with the ability to change modes ”on the fly” are provided
    for true realism.




・商品カテゴリー当店在庫有り商品に掲載しています商品は、即日配送又は翌日配送でご対応させて頂きます。
・商品詳細に在庫有りと表記されていない商品は、お取り寄せとなります。
roco (ご注文商品の追跡状況は当店より随時お知らせを致します)
・欧州型鉄道模型は、ご注文日から約7日〜12日でのお届けとなります。
・米国型鉄道模型は、約1週間程度でのお届けとなります。
・ご予約商品をお求めの際は、クレジット決済並びにコンビニ決済は不可となります。
ご予約商品をお求めの際は、銀行振込又は代金引換でご指定でお願い致します。
・ご注文は、通常のEメール、FAX からでもお受けします。お支払い方法は、銀行振込並びに代金引換のみのご対応となります。
・関税は当店が負担しておりますので一切かかりません。
型番 10003263
販売価格 54,128円(内税)
購入数

おすすめ商品

roco

roco

roco